Auto-Tie Horizontal
Model AT-1044-50
Revised: 1/2007
HYDRAULIC
Main Pumps 105 GPM Total Flow (Regen. System)
System Pressure 3000 PSI
Main Cylinder 10 In Bore, 84 In Stroke
Tension Cylinder (5) 6 In Bore
Wire Inserter Cylinder 2 1/2 In Bore
Wire Twister Hydraulic Motor
Total Force 235,500 Lb
Ram Face Pressure 185 PSI
Oil Reservoir 300 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
Auto-Tier (5) Five Wire Hydraulic Tier for up to 10 GA
Black Annealed Wire
ELECTRICAL
Main Motor 50 HP, 460 Volt, 3 Phase, TEFC, Wye Delta Starting
Cooler 3 HP, 460 Volt
Controls Programmable Controller with Phone Modem
Photocell Infrared Type
STRUCTURAL
Length Overall 32 Ft 3 In
Width Overall 13 Ft 4 In (at the tier station)
Charging Hopper Ht. 98 In
Charge Box Opening 28 In Wide x 60 In Long
Shear Blade Abrasion Resistant Alloy Steel, V Blade on Platen
Floor of Baler is Long Wearing Hardox 400 or equal, Bottom of Platen is Hardox 400 or equal
Shipping Weight 20 Tons Approximate
PERFORMANCE
Bale Size expanded 30 In Wide x 43 In High x Variable Length
Bale Volume @ 72 In Long 53.75 Cubic Feet Expanded (Approximate)
Cycle Time 24 Seconds (No Load)
Capacity 7,580 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density Pound Per Cubic Foot |
Tons Per Hour @65% Loading Efficiency |
|
High Grade Paper |
up to 2000 |
up to 37 |
Estimated 2.0 |
up to 7.2 |
|
News |
up to 1900 |
up to 36 |
Estimated 1.5 |
up to 5.5 |
|
O.C.C. |
up to 1850 |
up to 35 |
Estimated 1.0 |
up to 3.7 |
|
AL Cans |
up to 1150 |
up to 22 |
Estimated 1.0 |
up to 3.5 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
STANDARD FEATURES AVAILABLE OPTIONS
Programmable Controller with Model Material Fluffer
Oil Cooler (air over oil) System Mid Tension System
Wye Delta Starting Precompression Lid
Bale Runout Table (6 Ft Long) Contact Factory for other Available Options