Auto-Tie Baler with Hinged Sidewall
Model AT-1080-HS-100S
Revised: 9/03
HYDRAULIC
Main Pumps 298 GPM Total Flow (Regen. System)
System Pressure 3000 PSI
Main Cylinder 10 In Bore
Hinge Side Cylinder 7 In Bore
Tension Cylinder 6 In Bore
Total Force 235,500 Lb – 118 Tons
Ram Face Pressure 187 PSI
Oil Reservoir 600 Gallon Capacity
Filtration 7 Micron Replacement Element Filter
Main Motor 100 HP, 460 Volt, 3 Phase, TEFC, Special Duty, Wye-Delta Starting
Cooler Fan 3 HP, 460 Volt
Cooler Pump 7.5 HP, 460 Volt
Controls Programmable Controller with Phone Modem
Photocell Infrared Type
Hopper Opening 66 In Wide x 72 In Long
Charge Box Opening 55 In Wide x 72 In Long
Length Overall 34 Ft 10 In (Frame only)
Width Overall 13 Ft 4 In (at the Tier Station)
Height Overall 123 In (Height of Charge Hopper)
Shear Blade High Abrassion Resistant Alloy Steel
Shipping Weight 29 Tons Approximate
Bale Size Expanded 30 In Wide x 45 In High x Variable Length
Bale Volume @ 62 In Long 48.4 Cubic Feet Expanded (Approximate)
Cycle Time 12 Seconds (No Load)
Capacity 24,000 Cubic Feet per Hour (No Load)
|
Material Infeed Density |
Bale Weight LB |
Density LB Per Cubic Foot |
Pounds Per Stroke |
Tons Per Hour
|
|
10 PCF |
1580 – 1750 |
33 – 36 |
800 |
48 |
|
8 PCF |
1550 – 1680 |
32 – 35 |
640 |
40 |
|
6 PCF |
1500 – 1630 |
31 – 34 |
480 |
32 |
|
4 PCF |
1450 – 1590 |
30 – 33 |
320 |
22 |
|
2 PCF |
1400 – 1530 |
29 – 32 |
160 |
14 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
Programmable Controller with Phone Modem Oil Heater
Oil Cooler Conveyor Controls
Bale Runout Table (10 Ft Long) Feed Hopper Extension with Upper Level Sensor
Wye-Delta Starting Contact Factory for other Options