Auto-Tie Horizontal
Model AT-724-30
Revised: 12/05
HYDRAULIC
Main Pumps 63 GPM Total Flow
System Pressure 3000 PSI
Main Cylinder 7 In Bore, 63 In Stroke, 4 In Rod
Tension Cylinder 6 In Bore
Wire Inserter Cylinder 2 1/2 In Bore
Wire Twister Hydraulic Motor
Total Force 115,400 Lb – 58 Ton
Ram Face Pressure 93 PSI
Oil Reservoir 200 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
Auto-Tier (5) Five Wire Hydraulic Tier for up to 10 GA
Black Annealed Wire
ELECTRICAL
Main Motor 30 HP, 460 Volt, 3 Phase, TEFC, High Efficiency
Cooler Fan 2 HP, 460 Volt (Optional)
Controls Programmable Controller
Photocell Infrared Type
STRUCTURAL
Length Overall 289 in
Width Overall 160 In (at the tier station)
Charging Hopper Ht. 92 In
Charge Box Opening 27 In Wide x 36 In Long
Breaker Bar 1.5 In Gap
Shipping Weight 11 Tons Approximate
PERFORMANCE
Bale Size 29 In Wide x 43 In High x Variable Length
Bale Volume @ 72 In Long 52 Cubic Feet Expanded (Approximate)
Cycle Time 14 Seconds (No Load)
Capacity 8,700 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density Pound Per Cubic Foot |
Tons Per Hour Under Load |
|
Shredded OCC |
up to 1400 |
up to 27 |
Estimated 2.0 |
up to 5 |
|
Shredded News |
up to 1450 |
up to 28 |
Estimated 1.0 |
up to 3 |
|
Shredded High Grades |
up to 1560 |
up to 30 |
Estimated 1.5 |
up to 4 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities,
Feed Rates, And Other Variables in Baling
STANDARD FEATURES AVAILABLE OPTIONS
Programmable Controller Oil Heater
Across the Line Starting Oil Cooler
Hopper Access Door w/Safety Interlock Contact Factory for other Available Options