Auto-Tie Baler with Hinged Sidewall

     Model AT-765-HS-75       

       Revised: 01/2006

HYDRAULIC

            Main Pumps                                  137 GPM Total Flow (Regen System) 

            System Pressure                     3000 PSI

            Main Cylinder                          7 In Bore

            Hinge Side Cylinder             5 In Bore

            Tension Cylinder                   6 In Bore

            Total Force                               115,400 Lb – 80 Tons

            Ram Face Pressure                93 PSI

            Oil Reservoir                           400 Gallon Capacity

            Filtration                                  10 Micron Replacement Element Filter

            Auto-Tier                                     (5) Five Wire Hydraulic Tier - Maximum 10 GA Black annealed wire

ELECTRICAL

            Main Motor                                75 HP, 460 Volt, 3 Phase, TEFC, High Efficiency

            Cooler Fan                                 1 HP, 460 Volt

            Cooler Pump                              5 HP, 460 Volt

            Controls                                     Programmable Controller with Phone Modem

            Photocell                                   Infrared Type

STRUCTURAL

            Hopper Opening                        66 In Wide x 60 In Long

            Charge Box Opening             54 In Wide x 60 In Long

         Length Overall                      30 Ft 10 In  (Frame only)

            Width Overall                         13 Ft  4 In (at the Tier Station)

            Height Overall                       123 In (Height of Charge Hopper)

            Shear Blade                               High Abrasion Resistant Alloy Plate

         Platen Assembly Moves on High Abrasion Resistant Alloy Plate

            Bottom of Platen is High Resistant Alloy Plate

            The Replaceable Liners are plug welded to the baler and can be replaced as needed      

            Shipping Weight                       17 Tons Approximate        

PERFORMANCE

            Bale Size Expanded               30 In  Wide x 45 In  High  x Variable Length

            Bale Volume @ 62 In Long  48.4 Cubic Feet Expanded (Approximate)

            Cycle Time                                  16 Seconds (No Load)

            Capacity                                      14,625 Cubic Feet per Hour (No Load)

 

Material	Bale Weight LB	Density LB Per Cubic Foot	Loose Infeed Density LB Per Cubic Foot	Tons Per Hour @ 65% Loading Efficiency
High  Grade  Paper	up to 1600	up to 33	Estimated 4	up to 20
News	up to 1450	up to 30	Estimated 3.5	up to  18
OCC	up to 1350	up to 28	Estimated 2.5	up to  13
OCC – whole boxes	up to 1300	up to 27	Estimated .5	up to 4

 

*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling

 

STANDARD FEATURES                                          AVAILABLE OPTIONS

Programmable Controller with Phone Modem                  Material Fluffers

Across the Line Starting                                                     Oil Heater                                                      

Oil Cooler                                                                                      Conveyor Controls

Bale Runout Table (10 Ft Long)                                         Contact Factory for other Options

                                                                                               

Specifications and Design are Subject to Change if, in the opinion of the Manufacturer, the Change is an improvement.