Auto-Tie Baler with Hinged Sidewall
Model AT-865-HS-50
Revised: 12/05
HYDRAULIC
Main Pumps 88 GPM Total Flow (Regen. System)
System Pressure 3000 PSI
Main Cylinder 8 In Bore
Hinge Side Cylinder 5 In Bore
Tension Cylinder 6 In Bore
Total Force 150,800 Lb – 75 Tons
Ram Face Pressure 120 PSI
Oil Reservoir 300 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
ELECTRICAL
Main Motor 50 HP, 460 Volt, 3 Phase, TEFC, High Efficiency
Cooler Fan 2 HP, 460 Volt
Controls Programmable Controller with Phone Modem
Photocell Infrared Type
STRUCTURAL
Hopper Opening 66 In Wide x 60 In Long
Charge Box Opening 54 In Wide x 60 In Long
Length Overall 30 Ft 10 In (Frame only)
Width Overall 13 Ft 4 In (at the Tier Station)
Height Overall 123 In (Height of Charge Hopper)
Shear Blade T-1 Alloy Steel
Shipping Weight 23 Tons Approximate
FORMANCE
Bale Size Expanded 30 In Wide x 45 In High x Variable Length
Bale Volume @ 62 In Long 48.4 Cubic Feet Expanded (Approximate)
Cycle Time 25 Seconds (No Load)
Capacity 9,360 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density LB Per Cubic Foot |
Tons Per Hour @ 65% Loading Efficiency |
|
High Grade Paper |
up to 1600 |
up to 33 |
Estimated 4 |
up to 12 |
|
News |
up to 1450 |
up to 30 |
Estimated 3.5 |
up to 10 |
|
O.C.C. |
up to 1350 |
up to 28 |
Estimated 2.5 |
up to 7.5 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
Programmable Controller with Phone Modem Oil Heater
Oil Cooler Conveyor Controls
Bale Runout Table (10 Ft Long) Feed Hopper Extension with Upper Level Sensor
Across the Line Starting Contact Factory for other Options