Auto-Tie Horizontal
Model AT-872-75
Revised: 02/06
HYDRAULIC
Main Pumps 144 GPM Total Flow (Regen System)
System Pressure 3000 PSI
Main Cylinder 8 In Bore x 86 In Stroke x 5 In Rod
Tension Cylinder 6 In Bore
Wire Inserter Cylinder 2 1/2 In Bore
Wire Twister Hydraulic Motor
Total Force 150,800 Lb
Ram Face Pressure 74 PSI
Oil Reservoir 400 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
Auto-Tier (5) Five Wire Hydraulic Tier for up to 10 GA
Black Annealed Wire
ELECTRICAL
Main Motor 75 HP, 460 Volt, 3 Phase, TEFC, High Efficiency
Cooler Fan 3 HP, 460 Volt
Controls Programmable Controller with Phone Modem
Photocell Infrared Type
STRUCTURAL
Length Overall 31 Ft 8 In
Width Overall 15 Ft 4 In (at the tier station)
Charging Hopper Ht. 96 In
Charge Box Opening 46 In Wide x 60 In Long
Shear Blade High Abrasion Resistant Alloy Plate
Shipping Weight 16 Tons Approximate
PERFORMANCE
Bale Size expanded 48 In Wide x 43 In High x Variable Length
Bale Volume @ 62 In Long 74 Cubic Feet Expanded (Approximate)
Cycle Time 10 Seconds (No Load)
Capacity 25,900 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density Pound Per Cubic Foot |
Tons Per Hour @65% Loading Efficiency |
|
O.C.C. |
up to 1800 |
up to 25 |
Estimated 2.5 |
up to 17 |
|
O.C.C. open boxes |
up to 1750 |
up to 24 |
Estimated .5 |
up to 4 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
STANDARD FEATURES AVAILABLE OPTIONS
Programmable Controller with Modem Oil Heater
Oil Cooler (air over oil) System Factory Start Up
Across the Line Starting Conveyor Controls
Bale Runout Table (6 Ft Long) Contact Factory for other Available Options