Auto-Tie Baler with Hinged Sidewall

     Model AT-965-HS-100S       

       Revised: 9/2001

HYDRAULIC

            Main Pumps                                  225 GPM Total Flow (Regen. System)  

            System Pressure                     3000 PSI

            Main Cylinder                          9 In Bore

            Hinge Side Cylinder             7 In Bore

            Tension Cylinder                   6 In Bore

            Total Force                               190,800 Lb – 95 Tons

            Ram Face Pressure                162 PSI

            Oil Reservoir                           600 Gallon Capacity

            Filtration                                  7  Micron Replacement Element Filter

            Auto-Tier                                     (5) Five Wire Hydraulic Tier  - Maximum 10 GA Black annealed wire

ELECTRICAL

            Main Motor                                100 HP, 460 Volt, 3 Phase, ODP, Special Duty, Wye Delta Starting

            Cooler Fan                                 3 HP, 460 Volt

            Cooler Pump                              7.5 HP, 460 Volt

            Controls                                     Programmable Controller with Phone Modem

            Photocell                                   Infrared Type

STRUCTURAL

         Hopper Opening                        66 In  Wide  x  60 In  Long

            Charge Box Opening             54 In  Wide  x  60 In  Long

            Length Overall                      32 Ft  4 In  (Frame only)

            Width Overall                         13 Ft  4 In  (at the Tier Station)

            Height Overall                       123 In  (Height of Charge Hopper)

            Shear Blade                               T-1 Alloy Steel

            Shipping Weight                       24 Tons Approximate        

PERFORMANCE

            Bale Size Expanded               30 In  Wide x 45 In  High  x Variable Length

            Bale Volume @ 62 In Long  48.4 Cubic Feet Expanded (Approximate)

            Cycle Time                                  12 Seconds (No Load)

            Capacity                                      19,500 Cubic Feet per Hour (No Load)

Material	Bale Weight LB	Density LB Per Cubic Foot	Loose Infeed Density LB Per Cubic Foot	Tons Per Hour @ 65% Loading Efficiency
High  Grade  Paper	up to 1700	up to 35	Estimated 4	up to 25
News	up to 1600	up to 33	Estimated 3.5	up to 22
O.C.C.	up to 1450	up to 30	Estimated 2.5	up to 15
Aluminum Cans	up to 700 @ 42”	up to 22	Estimated  1.0	up to 7
HDPE	up to 550 @ 42”	up to 20	Estimated .75	up to 4.7
PET	up to 500 @ 42”	up to 18	Estimated .7	up to 4.2
TIN	up to 1050 @ 48”	up to 40	Estimated 4.0	up to 25

*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling

 

STANDARD FEATURES                                          AVAILABLE OPTIONS

Programmable Controller with Phone Modem                  Oil Heater

Oil Cooler                                                                                      Conveyor Controls

Bale Runout Table (10 Ft Long)                                                         Feed Hopper Extension with Upper Level Sensor

Wye-Delta Starting Standard                                         Material Fluffers

                                                                                                                Contact Factory For Other Options          

Specifications and Design are Subject to Change if, in the opinion of the Manufacturer, the Change is an improvement.