Auto-Tie Baler with Hinged Sidewall
Model AT-965-HS-75
Revised: 12/05
HYDRAULIC
Main Pumps 144 GPM Total Flow (Regen. System)
System Pressure 3000 PSI
Main Cylinder 9 In Bore
Hinge Side Cylinder 7 In Bore
Tension Cylinder 6 In Bore
Total Force 190,800 Lb – 95 Tons
Ram Face Pressure 162 PSI
Oil Reservoir 400 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
Main Motor 75 HP, 460 Volt, 3 Phase, TEFC, High Efficiency
Cooler 5 HP, 460 Volt
Controls Programmable Controller with Phone Modem
Photocell Infrared Type
Hopper Opening 66 In Wide x 60 In Long
Charge Box Opening 54 In Wide x 60 In Long
Length Overall 32 Ft 4 In (Frame only)
Width Overall 13 Ft 4 In (at the Tier Station)
Height Overall 123 In (Height of Charge Hopper)
Shear Blade T-1 Alloy Steel
Shipping Weight 24 Tons Approximate
Bale Size Expanded 30 In Wide x 45 In High x Variable Length
Bale Volume @ 62 In Long 48.4 Cubic Feet Expanded (Approximate)
Cycle Time 22 Seconds (No Load)
Capacity 10,600 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density LB Per Cubic Foot |
Tons Per Hour @ 65% Loading Efficiency |
|
High Grade Paper |
up to 1700 |
up to 35 |
Estimated 4 |
up to 14 |
|
News |
up to 1600 |
up to 33 |
Estimated 3.5 |
up to 12 |
|
O.C.C. |
up to 1450 |
up to 30 |
Estimated 2.5 |
up to 9 |
|
Aluminum Cans |
up to 700 @ 42” |
up to 22 |
Estimated 1.0 |
up to 3.5 |
|
HDPE |
up to 550 @ 42” |
up to 20 |
Estimated .75 |
up to 2.6 |
|
PET |
up to 500 @ 42” |
up to 18 |
Estimated .7 |
up to 2.4 |
|
TIN |
up to 1050 @ 48” |
up to 40 |
Estimated 4.0 |
up to 14 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
Programmable Controller with Phone Modem Oil Heater
Oil Cooler Conveyor Controls
Bale Runout Table (10 Ft Long) Feed Hopper Extension with Upper Level Sensor
Across the Line Starting Standard Contact Factory for other Options