Closed Door Horizontal

Model CD-1077-50                   

                                                                                                                                                            Revised: 2/07

HYDRAULIC

            Main Pumps                                  105 GPM Total Flow  (Regen System)

            System Pressure                     3000 PSI

            Main Cylinder                          10 In Bore, 108 In Stroke, 7 In Rod

            Door Cylinder                         5 In Bore

            Manifold                                      Built In Relief Valve

            Total Force                               235,500 Lb

            Ram Face Pressure                127 PSI

            Oil Reservoir                           300 Gallon Capacity

            Filtration                                  10 Micron Return Line  Filter

ELECTRICAL

            Main Motor                                50 HP, 460 Volt, 3 Phase (Standard)

            Cooler System                         2 HP, 460 Volt, 3 Phase

            Controls                                     All Control Circuits 120 Volts

            Enclosure                                   Nema 12 Rated

            Photocell                                   Infrared Type

            Motor Type                                 TEFC, High Efficiency, Across The Line Starting is  Standard

 

STRUCTURAL

         Length Overall                      320 In 

            Width Frame                              60 In

            Charging Hopper Ht.            90 In  

            Hopper Opening                        41 In Wide x 72 In Long

            Shear Blade                               High Abrasion Resistant Alloy Plate

            Shipping Weight                       40,000 Lb Approximate

            Platen Assembly Moves on High Abrasion Resistant Alloy Plate

            Bottom of Platen is High Resistant Alloy Plate

            The Replaceable Liners are plug welded to the baler and can be replaced as needed         

 

PERFORMANCE

            Bale Size                                       44 In Wide x 42 In High X 72 In Length

            Bale Volume                              79 Cubic Feet

            Bale Weight                               2000 - 2200 Lb OCC

            Bale Density                              26 - 28 Lb Per Cubic Foot

            Cycle Time                                  24 Seconds (No Load)

            Five Wire-Tie Slots

           

*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling

 

OPTIONS

            Feed Hopper Extension with Upper Level Sensor    High Oil Temp

            Conveyor Controls                                                     Low Oil Level

            Oil Heater

            Bale Runout Table                                                                                                       

            Baling Wire

 

Specifications and Design are Subject to Change if, in the opinion of the Manufacturer, the Change is an improvement.