Closed Door Horizontal

Model CD-632-60 or CD-632-72                   

Revised: 1/03

HYDRAULIC

            Main Pumps                                  42 GPM Total Flow  

            System Pressure                     3000 PSI

            Main Cylinder                          6 In Bore, 63 In Stroke, 3.5 In Rod

            Door Cylinder                         3.25 In Bore

            Manifold                                      Built In Relief Valve

            Total Force                               84,780 Lb

            Ram Face Pressure                78 PSI

            Oil Reservoir                           125 Gallon Capacity

            Filtration                                  10 Micron Return Line Filter

 

ELECTRICAL

            Main Motor                                20 HP, 230/460 Volt, 3 Phase (Standard)

            Controls                                     All Control Circuits 120 Volts

            Photocell                                   Infrared Type

            Motor Type                                 TEFC, High Efficiency, Across The Line Starting is

                                                                        Standard

 

STRUCTURAL                            60 In Bale                         72 In Bale

         Length Overall                      220 In                                            232 In

            Width Frame                              34.5 In

            Charging Hopper Ht.            72.5 In  

            Hopper Opening                        28 In Wide x 50 In Long

            Breaker Bar                              1.5 in

            Shipping Weight                       7,900 Lb Approximate                         8,100 Lb

            Platen Assembly Moves on Long Wearing AR Plate, Bottom of Platen is Long Wearing RyerTex

 

PERFORMANCE

            Bale Size                                       30 In Wide x 36 In High x 60 In Length or (72 In Long)

            Bale Volumn                              37.5 Cubic Feet                       45 Cubic Feet

            Bale Weight                               900 - 1100 Lb of OCC                                1000 – 1300 Lb of OCC

            Bale Density                              Up To 29 Lb Per Cubic Foot

            Cycle Time                                  20 Seconds (No Load)

            Four Wire-Tie Slots

           

*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling

 

OPTIONS

            Feed Hopper Extension with Upper Level Sensor                   

            Oil Heater

            Bale Runout Table                                                                       

            Baling Wire

            Conveyor Controls

 

Specifications and Design are Subject to Change if, in the opinion of the Manufacturer, the Change is an improvement.