Closed Door Horizontal
Model CD-722
Main Pumps 42 GPM Total Flow
System Pressure 3000 PSI
Main Cylinder 7 In Bore, 63 In Stroke, 4 In Rod
Door Cylinder 4 In Bore
Manifold Built In Relief Valve
Total Force 115,400 Lb
Ram Face Pressure 107 PSI
Oil Reservoir 125 Gallon Capacity
Filtration 10 Micron Return Line Filter
Main Motor 20 HP, 230/460 Volt, 3 Phase (Standard)
Controls All Control Circuits 120 Volts
Photocell Infrared Type
Motor Type TEFC, High Efficiency, Across The Line Starting is
Standard
Length Overall 230 In
Width Frame 34.5 In
Charging Hopper Ht. 72.5 In
Hopper Opening 28 In Wide x 36 In Long
Shear Bar Sherrated
Shipping Weight 9,900 Lb Approximate
Platen Assembly Moves on High Abrasion Resistant Alloy Plate
Bale Size 30 In Wide x 36 In High x 60 In Length
Bale Weight Up To 1500 Lb of High Grade Paper
Bale Density Up To 30 Lb Per Cubic Foot
Cycle Time 27 Seconds (No Load)
Five Wire-Tie Slots
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
Cart Dumper and Carts
Feed Hopper Extension with Upper Level Sensor
Oil Heater
Bale Runout Table
Baling Wire
Conveyor Controls