Closed Door Horizontal

Model CD-736-60 or CD-736-72                   

Revised: 3/06

HYDRAULIC

            Main Pumps                                  42 GPM Total Flow 

            System Pressure                     3000 PSI

            Main Cylinder                          7 In Bore, 63 In Stroke, 4 In Rod

            Door Cylinder                         3.25 In Bore

            Manifold                                      Built In Relief Valve

            Total Force                               115,400 Lb

            Ram Face Pressure                93 PSI

            Oil Reservoir                           125 Gallon Capacity

            Filtration                                  10 Micon Return Line Filter

 

ELECTRICAL

            Main Motor                                20 HP, 230/460 Volt, 3 Phase (Standard)

            Controls                                     All Control Circuits 120 Volts

            Photocell                                   Infrared Type

            Motor Type                                 TEFC, High Efficiency, Across The Line Starting is

                                                                        Standard

 

STRUCTURAL                            60 In Bale                         72 In Bale

         Length Overall                      242 In                                            254 In

            Width Frame                              34.5 In

            Charging Hopper Ht.            83 In  

            Hopper Opening                        28 In Wide x 50 In Long

            Shear Blade                               High Abrasion Resistant Alloy Plate

            Shipping Weight                       10,500 Lb Approximate       11,000 Lb

            Platen Assembly Moves on High Abrasion Resistant Alloy Plate

            Bottom of Platen is High Abrasion Resistant Alloy Plate

 

PERFORMANCE

            Bale Size                                       30 In Wide x 43 In High x 60 In Length  (or 72 In Length)

            Bale Volume                              45 Cubic Feet                          54 Cubic Feet

            Bale Weight                               1100 - 1300 Lb                              1300 – 1500 Lb

            Bale Density                              24 - 29 Lb Per Cubic Foot

            Cycle Time                                  27 Seconds (No Load)

            Five Wire-Tie Slots

           

*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling

 

OPTIONS

            Feed Hopper Extension with Upper Level Sensor                   

            Oil Heater

            Bale Runout Table                                                                       

            Baling Wire

            Conveyor Controls

 

Specifications and Design are Subject to Change if, in the opinion of the Manufacturer, the Change is an improvement.