Closed Door Horizontal
Model CD-836-DP
Main Pumps 63 GPM Total Flow
System Pressure 3000 PSI
Main Cylinder 8 In Bore, 84 In Stroke, 5 In Rod
Penetrates Bale Chamber 34 Inches
Door Cylinder 4 In Bore
Manifold Built In Relief Valve
Total Force 125,600 Lb
Ram Face Pressure 105 PSI
Oil Reservoir 200 Gallon Capacity
Filtration 10 Micron Return Line Filter
Main Motor 30 HP, 230/460 Volt, 3 Phase (Standard)
Controls All Control Circuits 120 Volts
Photocell Infrared Type
Motor Type TEFC, High Efficiency, Across The Line Starting is
Standard
Length Overall 250 In
Width Frame 35 In
Charging Hopper Ht. 83 In
Hopper Opening 28 In Wide x 50 In Long
Shear Blade High Abrasion Resistant Alloy Plate
Shipping Weight 21,500 Lb Approximate
Platen Assembly Moves on High Abrasion Resistant Alloy Plate
Bottom of Platen is High Abrasion Resistant Alloy Plate
Bale Size 30 In Wide x 43 In High x 60 In Length
Bale Volume 45 Cubic Feet
Cycle Time 30 Seconds (No Load Full Stroke)
Five Wire-Tie Slots
Material |
Bale Weight |
Density – PCF |
Bales per Hour |
|
OCC |
1100 - 1400 LB |
25 - 30 |
1 - 3 |
|
Cores – up to .25 wall |
900 - 1100 LB |
20 - 25 |
1 - 3 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
Feed Hopper Extension with Upper Level Sensor Oil Heater
Oil Cooler Bale Runout Table
Baling Wire Conveyor Controls