Open End Horizontal Balers
HJA offers three different types of Open End horizontal balers.
- Narrow Box (Charge Box width of 28", 30" and 50")
- Wide Box (Charge Box width of 41", 48", 50", 60" and 72")
- Hinged Sidewall (Charge Box width of 35", 50", 54", 60", and 72")
If you are producing above 150 Tons per Month we strongly encourage you to consider an Open End horizontal baler.
The thru-put of an Open End horizontal baler depends on the horsepower, cylinder size, and size of baler.
Applications:
- The Narrow Box Open End horizontal baler is normally applied in air system and/or trim waste applications.
- The Wide Box Open End horizontal baler is normally applied in OCC applications. However, the OCC must be able to fall into the charge box opening without bridging. Also, the wide box can be used to bale high grades and ONP when a fluffer is used.
- The Open End Hinged Sidewall baler can be applied for large OCC, high grades, and ONP without a fluffer.
Common Customers
- Distribution Centers*
- Manufacturing Facilities*
- Mid Size Recycling Centers (Private and municipalities)
- Mid Size to Large Printers
